Ethernet Cfm - Dell PowerEdge M420 Reference Manual

Ethernet CFM

Command
ethernet cfm domain
service
ethernet cfm cc level
ethernet cfm mep level
ethernet cfm mep enable
ethernet cfm mep active
ethernet cfm mep archive-
hold-time
ethernet cfm mip level
ping ethernet cfm
traceroute ethernet cfm
show ethernet cfm errors
show ethernet cfm domain Displays the configured parameters in a
show ethernet cfm
maintenance-points local
show ethernet cfm
maintenance-points remote
show ethernet cfm statistics Displays the CFM statistics.
debug cfm
90
Command Groups
Description
Enters into maintenance domain config mode
for an existing domain. Use the optional level
parameter to create a domain and enter into
maintenance domain config mode.
Associates a VLAN with a maintenance domain. MDC
Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
Enables a MEP at the specified level and
direction.
Activates a MEP at the specified level and
direction.
Maintains internal information on a missing
MEP .
Creates a Maintenance Intermediate Point
(MIP) at the specified level.
loopback message (LBM) from
Generates a
the configured MEP.
Generates a link trace message (LTM) from the
configured MEP.
Displays the cfm errors.
maintenance domain.
Displays the configured local maintenance
points.
Displays the configured remote maintenance
points.
Enables CFM debugging.
a
Mode
GC
GC
IC
IC
IC
IC
IC
PE
PE
PE
PE
PE
PE
PE
PE