Dell PowerEdge M420 Reference Manual page 118

Command
show gmrp configuration
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
IGMP
Command
ip igmp
ip igmp last-member-query-
count
ip igmp last-member-query-
interval
ip igmp query-interval
ip igmp query-max-
response-time
ip igmp robustness
ip igmp startup-query-count Sets the number of queries sent out on
ip igmp startup-query-
interval
ip igmp version
show ip igmp
show ip igmp groups
118
Command Groups
Description
Displays GMRP configuration.
Description
Sets the administrative mode of IGMP in the
system to active.
Sets the number of Group-Specific Queries
sent before the router assumes that there are
no local members on the interface.
Configures the Maximum Response Time
inserted in Group-Specific Queries which are
sent in response to Leave Group messages.
Configures the query interval for the specified
interface. The query interval determines how
fast IGMP Host-Query packets are transmitted
on this interface.
Configures the maximum response time
interval for the specified interface.
Configures the robustness that allows tuning
of the interface.
startup—at intervals equal to the startup
query interval for the interface.
Sets the interval between general queries sent
at startup on the interface.
Configures the version of IGMP for an
interface.
Displays system-wide IGMP information.
Displays the registered multicast groups on the
interface.
a
Mode
GC or
IC
a
Mode
GC
IC
IC
IC
IC
IC
IC
IC
IC
PE
PE