Dot1X Timeout Guest-Vlan-Period - Dell PowerEdge M420 Reference Manual

Parameter Description
This command has no arguments or keywords.
Default Configuration
Dot1x monitor mode is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables 802.1x globally.
console(config)# dot1x system-auth-control monitor

dot1x timeout guest-vlan-period

Use the dot1x timeout guest-vlan-period command in Interface
Configuration mode to set the number of seconds that the switch waits
before authorizing the client if the client is a dot1x unaware client.
Syntax
seconds
dot1x timeout guest-vlan-period
seconds —
Time in seconds that the switch waits before authorizing the
client if the client is a dot1x unaware client.
Default Configuration
The switch remains in the quiet state for 90 seconds.
Command Mode
Interface Configuration (Ethernet) mode
774
802.1x Commands