Name (Vlan Configuration) - Dell PowerEdge M420 Reference Manual

Example
The following example displays how to enable Double VLAN Tunneling at
gigabit ethernet port 1/0/1.
console(config-if-1/0/1)#mode dvlan-tunnel

name (VLAN Configuration)

Use the name command in VLAN Configuration mode to configure the
VLAN name. To return to the default configuration, use the no form of this
command.
NOTE: This command cannot be configured for a range of interfaces (range
context).
Syntax
vlan–name
name
no name
Parameter Description
Parameter
vlan–name
Default Configuration
The default VLAN name is default.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
The VLAN name may include any alphanumeric characters including a space,
underscore, or dash. Enclose the string in double quotes to include spaces
within the name. The surrounding quotes are not used as part of the name.
The CLI does not filter illegal characters and may truncate entries at the first
illegal character or reject the entry entirely.
724
VLAN Commands
Description
The name of the VLAN. Must be 1–32 characters in length.