Show Radius Statistics - Dell PowerEdge M420 Reference Manual

Source IP : 0.0.0.0
RADIUS Attribute 4 Mode : Disable
RADIUS Attribute 4 Value : 0.0.0.0
console#show radius-servers accounting name
Server Name
---------------------- -------------- ------ ----------
Default-RADIUS-Server
console#show radius-servers name Default-RADIUS-Server
RADIUS Server Name.......................... Default-RADIUS-Server
Current Server IP Address................... 1.1.1.1
Retransmits................................. 4
Timeout..................................... 5
Deadtime.................................... 0
Port........................................ 1812
Source IP................................... 0.0.0.0
Secret Configured........................... No
Message Authenticator....................... Enable

show radius statistics

Use the show radius statistics command to show the statistics for an
authentication or accounting server.
Syntax
show radius statistics [accounting | authentication ] [{
servername
| name
670
RADIUS Commands
Host Address
2.2.2.2
}]
Port Type
1813 Secondary
ipaddress hostname
|