Show Ip Ospf Interface Brief; Show Ip Ospf Interface Stats - Dell PowerEdge M420 Reference Manual

show ip ospf interface brief

Use the show ip ospf interface brief command in Privileged EXEC mode to
display brief information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays brief information for the IFO object or virtual
interface tables.
console#show ip ospf interface brief
Router Hello Dead Retrax Retrax LSAAck
Interface AdminMode Area ID Priority Intval Intval Intval Delay Intval
--------- --------- ------- -------- ------ ------ ------ ----- ------
vlan1 Enable
vlan2 Disable
vlan3 Disable
loopback2 Disable

show ip ospf interface stats

Use the show ip ospf interface stats command in User EXEC mode to display
the statistics for a specific interface. The information is only displayed if
OSPF is enabled.
Syntax
show ip ospf interface stats vlan
0.0.0.10 1
0.0.0.0 1
0.0.0.0 1
0.0.0.0 1
vlan-id
10 40 5
10 40 5
10 40 5
10 40 5
OSPF Commands
1 1
1 1
1 1
1 1
1131