Show Captive-Portal Configuration Locales - Dell PowerEdge M420 Reference Manual

console#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1
Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0

show captive-portal configuration locales

Use the show captive-portal configuration locales command to display
locales associated with a specific captive portal configuration.
Syntax
cp-id
show captive-portal configuration locales
cp-id —Captive Portal Configuration ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------
en
1299
Captive Portal Commands