Show Supported Switchtype - Dell PowerEdge M420 Reference Manual

Parameter
Card Type
Model Identifier
Card Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC
User Guidelines
The CID information is used when pre-configuring cards using the slot
command.

show supported switchtype

Use the show supported switchtype command in User EXEC mode to display
information about all supported switch types.
Syntax
show supported switchtype [
switchindex — Specifies the index into the database of the supported
•
switch types, indicating the type of the switch being preconfigured. The
switch index is a 32-bit integer. (Range: 0–65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Description
The 32-bit numeric card type for the
supported card.
The model identifier for the supported
card type.
The description for the supported card
type.
switchindex
]
System Management Commands
1567