show trapflags
Use the show trapflags command in Privileged EXEC mode to display SNMP
traps globally or to display specific SNMP traps.
Syntax
cp-type
show trapflags [acl | auto-copy-sw | captive-portal
| dot1q | dvrmp |
ospftype
ospfv3type
link | maclock | multiple-users | ospf
| ospfv3
| pim |
poe | snmp authentication | spanning-tree |stack | vrrp]
Syntax Description
Show trapflags with no other arguments shows the trap status for all
components. Use the more specific form to display the trap status for an
individual component. Only one component argument may be given.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show trapflags
Authentication Flag.................Enable
Link Up/Down Flag...................Enable
Multiple Users Flag.................Enable
Spanning Tree Flag..................Enable
ACL ................................Enable
Dot1q.............................. Enable
VRRP .............................. Enable
1481
SNMP Commands