Ipv6 Pimsm Hello-Interval; Ipv6 Pimsm Join-Prune-Interval - Dell PowerEdge M420 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm dr-priority 10

ipv6 pimsm hello-interval

Use the ipv6 pimsm hello-interval command to configure the PIM-SM Hello
Interval for the specified interface. Use the "no" form of this command to set
the hello interval to the default.
Syntax
ipv6 pimsm hello-interval interval
no ipv6 pimsm hello-interval
• interval— The hello interval (Range: 0–65535 seconds).
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm hello-interval 45

ipv6 pimsm join-prune-interval

Use the ipv6 pimsm join-prune-interval command to configure the interface
join/prune interval for the PIM-SM router. Use the "no" form of this
command to set the join/prune interval to the default.
1053
IPv6 Multicast Commands