Ip Ssh Port - Dell PowerEdge M420 Reference Manual

AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWlAl4kpqIw9GBRon
ZQZxjHKcqKL6rMlQ+ZNXfZSkvHG+QusIZ/76ILmFT34v7u7ChFAE+
Vu4GRfpSwoQUvV35LqJJk67IOU/zfwOl1gkTwml75QR9gHujS6KwG
N2QWXgh3ub8gDjTSqMuSn/Wd05iDX2IExQWu08licglk02LYciz+Z
4TrEU/9FJxwPiVQOjc+KBXuR0juNg5nFYsY0ZCk0N/W9a/tnkm1sh
RE7Di71+w3fNiOA6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f
+Rmt5nhhqdAtN/4oJfce166DqVX1gWmNzNR4DYDvSzg0lDnwCAC8Q
h
console(config-pubkey-key)#exit

ip ssh port

Use the ip ssh port command in Global Configuration mode to specify the
TCP port to be used by the SSH server. To use the default port, use the no
form of this command.
Syntax
port-number
ip ssh port
no ip ssh port
port-number — Port number for use by the SSH server. (Range: 1–65535)
•
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the port to be used by the SSH server as
8080.
console(config)#ip ssh port 8080
1504
SSH Commands