Show Crypto Key Pubkey-Chain Ssh - Dell PowerEdge M420 Reference Manual

wRW3QtgXaGwYt2rdlr3x8ViAF6B7AKYd8xGVVjyJTD6TjrCRRwQHg
B/BHsFr
z/Rl1SYa0vFjel/7/0qaIDSHfHqWhajYkMa4xPOtIye7oqzAOm1b7
6l28uTB
luBEoLQ+PKOKMiK8sQ==
Fingerprint(hex):
58:7f:5c:af:ba:d3:60:88:42:00:b0:2f:f1:5a:a8:fc
Fingerprint(bubbleBabble): xodob-liboh-heret-tiver-
dyrib-godac-pynah-muzyt-mofim-bihog-cuxyx

show crypto key pubkey-chain ssh

Use the show crypto key pubkey-chain ssh command in Privileged EXEC
mode to display SSH public keys stored on the switch.
Syntax
show crypto key pubkey-chain ssh [username
babble | hex]
username — Specifies the remote SSH client username. (Range: 1–48
•
characters)
• bubble-babble — Fingerprints in Bubble Babble format.
• hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaults
to Hex format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
username
] [fingerprint bubble-
SSH Commands
1509