Mode Commands; Configure Terminal - Dell PowerEdge M420 Reference Manual

70

Mode Commands

This chapter explains the following commands:

configure terminal

do
configure terminal
Use the configure terminal command to get to the configure line. This
command is equivalent to the configure command.
Syntax
configure terminal
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Example
console#conf t
console(config)#
console#configure terminal
console(config)#
do
Use the do command to execute commands available in Privileged EXEC
mode from Global Configuration and other modes. Command completion
using the space bar is not available when using this command. When in
1387
Mode Commands