<190> JAN 10 18:59:17 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 369 %%
[CLI:----:EIA-232] Access level of user admin has been
set to 15
If enabled, the CLI command logger subsystem begins to log commands
immediately after the user is authenticated. After authentication, the CLI
generates an explicit message and invokes the command logger. The format of
the message at login is:
<189> JAN 10 18:58:56 10.27.21.22-2
CMDLOGGER[209809328]: cmd_logger_api.c(83) 361 %%
CLI:10.27.21.22:admin:User admin logged in
<190> JAN 10 18:58:56 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 362 %%
[CLI:admin:10.27.21.22] User has successfully logged
in
The CLI command log subsystem also logs all user log out instances. The
format of the log message is:
<190> JAN 10 19:01:04 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 382 %%
[CLI:admin:10.27.21.22] User has logged out
Commands in this Chapter
This chapter explains the following commands:
clear logging
clear logging file
description
level
logging cli-command
logging
logging audit
logging buffered
1514
Syslog Commands
logging file
logging on
logging snmp
logging web-session
port
show logging
show logging file
show syslog-servers