Passive-Interface Default - Dell PowerEdge M420 Reference Manual

passive-interface default

The passive-interface default command enables the global passive mode by
default for all interfaces. It overrides any interface level passive mode. Use the
"no" form of this command to disable the global passive mode by default for
all interfaces. Any interface previously configured to be passive reverts to non-
passive mode.
Syntax
passive-interface default
no passive-interface default
Default Configuration
Global passive mode is disabled by default.
Command Mode
Router OSPF Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#passive-interface
passive-interface
Use the passive-interface command to set the interface as passive. It
overrides the global passive mode that is currently effective on the interface.
Use the "no" form of this command to set the interface as non-passive.
Syntax
vlan-id
passive-interface vlan
vlan-id
no passive-interface vlan
vlan-id — The vlan number
•
1111
OSPF Commands