Ipv6 Pim Dr-Priority; Ipv6 Pim Hello-Interval - Dell PowerEdge M420 Reference Manual

ipv6 pim dr-priority

Use the ipv6 pim dr-priority command to administratively configure the
advertised designated router (DR) priority. Use the no form of this command
to return the configuration to the default.
Syntax
ipv6 pim dr-priority
no ipv6 pim dr-priority
Parameter Description
Parameter
priority
Default Configuration
The default election priority is 1.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
This command only has an effect if sparse mode is enabled. Lower values are
preferred.
Example
console(if-vlan-10)#ipv6 pim dr-priority 32768

ipv6 pim hello-interval

Use the ipv6 pim hello-interval command to administratively configure the
frequency of PIM Hello messages for the specified interface. Use the no form
of this command to return the configuration to the default.
Syntax
ipv6 pim hello-interval
priority
Description
The administratively configured priority. Range: 0–2147483647.
interval
IPv6 PIM Commands
943