Area Stub No-Summary - Dell PowerEdge M420 Reference Manual

Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub

area stub no-summary

Use the area stub no-summary command in Router OSPFv3 Configuration
mode disable the import of Summary LSAs for the stub area identified by
area-id .
Syntax
area-id
area stub no-summary
area-id
no area stub no-summary
area-id
• — Valid OSPFv3 area identifier.
• so-summary — Disable the import of Summary LSAs for the stub area
identified by area-id.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
OSPFv3 Commands
1153