Show Ipv6 Pim Rp Mapping - Dell PowerEdge M420 Reference Manual

Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Field
RP Address
Type
Example
(console) # show ipv6 pim rp-hash ff1e:abcd:fed1::0
RP Address
Type
If no RP Group mapping exist on the router, the following message is
displayed:
No RP-Group mappings exist/learnt on this router.

show ipv6 pim rp mapping

Use the show ipv6 pim rp mapping command to display the mappings for the
PIM group to the active Rendezvous Points (RPs).
Syntax
show ipv6 pim rp mapping [
956
IPv6 PIM Commands
Description
Address of the RP
Origin from where this group mapping is learned
2001:0db8:0:abcd::1
Static
rp-address
]