Show Ip Ospf - Dell PowerEdge M420 Reference Manual

Example
The following example enters into router OSPF mode.
console(config)#router ospf
console(config-router)#

show ip ospf

Use the show ip ospf command to display information relevant to the OSPF
router. This command has been modified to show additional fields.
Syntax
show ip ospf
Syntax Description
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes.
User Guidelines
Some of the information below displays only if you enable OSPF and
configure certain features. The following fields may be displayed:
Field
Router ID
OSPF Admin
Mode
Description
A 32-bit integer in dotted decimal format identifying the router
about which information is displayed. This is a configured value.
Shows whether OSPF is administratively enabled or disabled.
OSPF Commands
1115