User Password - Dell PowerEdge M420 Reference Manual

console(config-CP 1)#user-logout
console(config-CP 1)#no user-logout
user name
Use the user name command to modify the user name for a local captive
portal user.
Syntax
user-id
user name
user-id — User ID (Range: 1–128).
•
name — user name (Range: 1–32 characters).
•
Default Configuration
There is no name for a user by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines.
Example
console(config-CP)#user 1 name johnsmith

user password

Use the user password command to create a local user or change the password
for an existing user.
Syntax
user-id
user password {
user-id — User ID (Range: 1–128).
•
password —User password (Range: 8–64 characters).
•
name
password
| encrypted
enc-password
}
Captive Portal Commands
1295