Ipv6 Multicast Commands; Ipv6 Pimsm (Global Config) - Dell PowerEdge M420 Reference Manual

IPv6 Multicast Commands

This chapter explains the following commands:

ipv6 pimsm (Global config)

ipv6 pimsm (VLAN Interface config)
ipv6 pimsm bsr-border
ipv6 pimsm bsr-candidate
ipv6 pimsm dr-priority
ipv6 pimsm hello-interval
ipv6 pimsm join-prune-interval
ipv6 pimsm register-threshold
ipv6 pimsm rp-address
ipv6 pimsm (Global config)
Use the ipv6 pimsm command to administratively enable PIMSM for IPv6
multicast routing. Use the "no" form of this command to disable PIMSM for
IPv6.
Syntax
ipv6 pimsm
no ipv6 pimsm
Default Configuration
IPv6 PIMSM is disabled on the router by default.
Command Mode
Global Configuration mode
ipv6 pimsm rp-candidate
ipv6 pimsm spt-threshold
ipv6 pimsm ssm
show ipv6 pimsm
show ipv6 pimsm bsr
show ipv6 pimsm interface
show ipv6 pimsm neighbor
show ipv6 pimsm rphash
show ipv6 pimsm rp mapping
IPv6 Multicast Commands
53
1049