Show Monitor Session - Dell PowerEdge M420 Reference Manual

User Guidelines
The source of a monitoring session must be configured before the destination
can be configured.
Example
The following examples show a simple port level configuration that mirrors
both transmitted and received packet from one port to another.
console(config)#monitor session 1 source interface
1/0/8
console(config)#monitor session 1 destination
interface 1/0/10
console(config)#monitor session 1 mode

show monitor session

Use the show monitor session command in Privileged EXEC mode to display
status of port monitoring.
Syntax
session_number
show monitor session
session _number — Session identification number.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Example
The following examples shows port monitoring status.
console#show monitor session 1
595
Port Monitor Commands