Commands In This Chapter; Aaa Authentication Dot1X Default - Dell PowerEdge M420 Reference Manual

support the concept of timeout, subsequent entries in the list are never
attempted. For example, the local authentication method implementation
does not supply a time-out value. If a list contains the local method, followed
by the radius authentication method, the radius method is not attempted.
Once an APL is created, a reference to that APL can be stored in the access
line configuration to determine how specific components should
authenticate users. The APL and associated component ID are stored
together. A single APL can be referenced by multiple users and components.
The administrator can enable/disable/reorder authentication methods on a
per method basis (see above).

Commands in this Chapter

This chapter explains the following commands:
aaa authentication dot1x
default
aaa authentication enable
aaa authentication login
aaa authorization network
default radius
aaa ias-user username
aaa ias-user username
clear (IAS)

aaa authentication dot1x default

Use the aaa authentication dot1x default command in Global Configuration
mode to specify an authentication method for 802.1x clients. Use the no form
of the command to return the authentication method to its default settings.
Syntax
aaa authentication dot1x default {radius| ias|local|none}
218
AAA Commands
enable authentication
enable password
ip http authentication
ip https authentication
login authentication
password (aaa IAS User
Configuration)
password (Line
Configuration)
password (User EXEC)
show aaa ias-users
show authentication
methods
show users accounts
show users login-history
username