Multicast Vlan Registration - Dell PowerEdge M420 Reference Manual

LLDP
Command
clear lldp remote-data
clear lldp statistics
lldp notification
lldp notification-interval
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
lldp transmit-tlv
show lldp
show lldp interface
show lldp local-device
show lldp remote-device
show lldp statistics
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Multicast VLAN Registration

Command
mvr
mvr group
mvr mode
98
Command Groups
Description
Deletes all data from the remote data table.
Resets all LLDP statistics.
Enables remote data change notifications.
Limits how frequently remote data change
notifications are sent.
Enables the LLDP receive capability.
Sets the timing parameters for local data
transmission on ports enabled for LLDP.
Enables the LLDP advertise capability.
Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
Displays the current LLDP configuration
summary.
Displays the current LLDP interface state.
Displays the LLDP local data.
Displays the current LLDP remote data.
Displays the current LLDP traffic statistics.
Description
Enables MVR.
Adds an MVR membership group.
Changes the MVR mode type.
a
Mode
PE
PE
IC
GC
IC
GC
IC
IC
IC
PE
PE
PE
PE
PE
a
Mode
GC or
IC
GC
GC