Layer 3 Commands - Dell PowerEdge M420 Reference Manual

Command
show dot1x clients
show dot1x interface
show dot1x statistics
show dot1x users
clear dot1x authentication-
history
dot1x guest-vlan
dot1x unauth-vlan
dot1x guest-vlan
show dot1x advanced
radius-server attribute 4
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Layer 3 Commands

ARP (IPv4)
Command
arp
arp cachesize
arp dynamicrenew
Description
Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
Shows the status of MAC Authentication
Bypass.
Displays 802.1X statistics for the specified
interface.
Displays active 802.1X authenticated users for
the switch.
Clears the authentication history table captured
during successful and unsuccessful
authentication.
Sets the guest VLAN on a port.
Specifies the unauthenticated VLAN on a port. IC
Defines a guest VLAN.
Displays 802.1X advanced features for the
switch or specified interface.
Sets the network access server (NAS) IP address
for the RADIUS server.
Description
Creates an Address Resolution Protocol (ARP)
entry.
Configures the maximum number of entries in
the ARP cache.
Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
Command Groups
a
Mode
PE
PE
PE
PE
PE
IC
IC
PE
GC
a
Mode
GC
GC
GC
113