Ip Http Authentication - Dell PowerEdge M420 Reference Manual

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines password "xxxyyyzzz" to control access to user
and privilege levels.
console(config)# enable password xxxyyyzzz

ip http authentication

Use the ip http authentication command in Global Configuration mode to
specify authentication methods for http server users. To return to the default,
use the no form of this command.
Syntax
ip http authentication
no ip http authentication
method1 [ method2 ...] — Specify at least one from the following table:
•
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This action has the same effect as the
command ip http authentication local.
method1 method2
[
Source or destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
...]
AAA Commands
227