Dell PowerEdge M420 Reference Manual page 94

Command
show arp switch
show hosts
show ip address-conflict
show ip helper-address
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
IPv6 ACL
Command
{ | }
deny permit
ipv6 access-list
ipv6 access-list rename
ipv6 traffic-filter
show ipv6 access-lists
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
IPv6 MLD Snooping
Command
ipv6 mld snooping
immediate-leave
ipv6 mld snooping
groupmembership-interval
94
Command Groups
Description
Displays the entries in the ARP table.
Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
Displays the status information corresponding
to the last detected address conflict.
Displays the ip helper addresses configuration.
Description
Creates a new rule for the current IPv6 access
list.
Creates an IPv6 Access Control List (ACL)
consisting of classification fields defined for the
IP header of an IPv6 frame.
Changes the name of an IPv6 ACL.
Attaches a specific IPv6 ACL to an interface or
associates it with a VLAN ID in a given
direction.
Displays an IPv6 access list (and the rules
defined for it).
Description
Enables or disables MLD Snooping immediate-
leave admin mode on a selected interface or
VLAN.
Sets the MLD Group Membership Interval
time on a VLAN or interface.
a
Mode
PE
UE
UE or
PE
PE
a
Mode
v6ACL
GC
GC
GC
IC
PE
a
Mode
IC
VLAN
IC
VLAN