Dell PowerEdge M420 Reference Manual page 124

Command
ipv6 mld last-member-
query-interval
ipv6 mld-proxy
ipv6 mld-proxy reset-
status
ipv6 mld-proxy unsolicit-
rprt-interval
ipv6 mld query-interval
ipv6 mld query-max-
response-time
ipv6 mld router
ipv6 mtu
ipv6 nd dad attempts
ipv6 nt managed-config-
flag
ipv6 nd ns-interval
ipv6 nd other-config-flag
ipv6 nd prefix
ipv6 nd ra-interval
124
Command Groups
Description
Sets the last member query interval for the
MLD interface, which is the value of the
maximum response time parameter in the
groupspecific queries sent out of this
interface.
Enables MLD Proxy on the router.
Resets the host interface status parameters of
the MLD Proxy router.
Sets the unsolicited report interval for the
MLD Proxy router.
Sets the MLD router's query interval for the
interface.
Sets MLD querier's maximum response time
for the interface.
Enables MLD in the router in global
configuration mode and for a specific
interface in interface configuration mode.
Sets the maximum transmission unit (MTU)
size, in bytes, of IPv6 packets on an interface.
Sets the number of duplicate address
detection probes transmitted while doing
neighbor discovery.
Sets the managed address configuration flag
in router advertisements.
Sets the interval between router
advertisements for advertised neighbor
solicitations.
Sets the other stateful configuration flag in
router advertisements sent from the
interface.
Sets the IPv6 prefixes to include in the router
advertisement.
Sets the transmission interval between router
advertisements.
a
Mode
IC
(VLAN)
IC
IC
IC
IC
IC
GC or
IC
IC
IC
IC
IC
IC
IC
IC