Mac Access-Group - Dell PowerEdge M420 Reference Manual

User Guidelines
Global mode command configures the ACL on all the interfaces, whereas the
interface mode command does so for the interface.
Examples
console(config)#ip access-group aclname in
console(config)#no ip access-group aclname in
console(config)#ip access-group aclname1 out
console(config-if-1/0/1)#ip access-group aclname out
2
console(config-if-1/0/1)#no ip access-group aclname
out

mac access-group

Use the mac access-group command in Global Configuration or Interface
Configuration mode to attach a specific MAC Access Control List (ACL) to
an interface in the in-bound direction.
Syntax
mac access-group
no mac access-group
• name — Name of the existing MAC access list. (Range: 1-31 characters)
• direction — Only the in-bound direction is supported.
• sequence — Order of access list relative to other access lists already
assigned to this interface and direction. (Range: 1-4294967295)
Default Configuration
The default direction is in (in-bound).
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, VLAN or
Port Channel) mode
name [direction] [sequence]
name
ACL Commands
251