Dell PowerEdge M420 Reference Manual page 89

Command
interface range
mtu
show interfaces advertise
show interfaces
configuration
show interfaces counters
show interfaces description Displays the description for all configured
show interfaces detail
show interfaces status
show statistics
show statistics switchport
show storm-control
shutdown
speed
storm-control broadcast
storm-control multicast
storm-control unicast
switchport protected
switchport protected name Configures a name for a protected group.
show switchport protected Displays protected group/port information.
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Description
Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
Enables jumbo frames on an interface by
adjusting the maximum size of a packet or
maximum transmission unit (MTU).
Displays information about auto negotiation
advertisement.
Displays the configuration for all configured
interfaces.
Displays traffic seen by the physical interface.
interfaces.
Displays the detail for all configured interfaces. UE
Displays the status for all configured interfaces. UE
Displays statistics for one port or for the entire
switch.
Displays detailed statistics for a specific port or
for the entire switch.
Displays the storm control configuration.
Disables interfaces.
Configures the speed of a given Ethernet
interface when not using auto-negotiation.
Enables Broadcast storm control.
Enables the switch to count Multicast packets
together with Broadcast packets.
Enables Unicast storm control.
Sets the port to Protected mode.
Command Groups
a
Mode
GC,
IC, IR
IC
PE
UE
UE
UE
PE
PE
PE
IC
IC
IC
IC
IC
IC
GC
PE
89