Dell PowerEdge M420 Reference Manual page 102

Command
conform-color
cos-queue min-bandwidth Specifies the minimum transmission
cos-queue random-detect
cos-queue strict
diffserv
drop
mark cos
mark ip-dscp
mark ip-precedence
match class-map
match cos
match destination-address
mac
match dstip
102
Command Groups
Description
Specifies for each outcome, the only possible
actions are drop, setdscp-transmit, set-prec-
transmit, or transmit.
bandwidth for each interface queue.
Configures WRED queue management policy
on an interface CoS queue.
Activates the strict priority scheduler mode for
each specified queue.
Sets the DiffServ operational mode to active.
Use the drop policy-class-map configuration
command to specify that all packets for the
associated traffic stream are to be dropped at
ingress.
Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
Marks all packets for the associated traffic
stream with the specified IP DSCP value.
Marks all packets for the associated traffic
stream with the specified IP precedence value.
Adds add to the specified class definition the
set of match conditions defined for another
class.
Adds to the specified class definition a match
condition for the Class of Service value.
Adds to the specified class definition a match
condition based on the destination MAC
address of a packet.
Adds to the specified class definition a match
condition based on the destination IP address
of a packet.
a
Mode
PCMC
GC or
IC
IC
GC or
IC
GC
PCMC
PCMC
PCMC
PCMC
CMC
CMC
CMC
CMC