Traceroute Ethernet Cfm - Dell PowerEdge M420 Reference Manual

Parameter
mac-addr
remote-mpid
domain
vlan-id
mpid
count
Default Configuration
By default, this command will transmit one loopback message with a timeout
of five seconds.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console #ping ethernet cfm mac 00:11:22:33:44:55 level
1 vlan 10 mpid 1 count 10

traceroute ethernet cfm

Use the traceroute ethernet command in Privileged EXEC mode to generate
a link trace message (LTM) from the configured MEP .
416
Ethernet CFM Commands
Description
The destination MAC address for which the connectivity needs
to be verified. Either MEP ID or the MAC address option can
be used.
The MEP ID for which connectivity is to be verified; i.e. the
destination MEP ID.
Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
A VLAN associated with the maintenance domain. Range: 1-
4094.
The MEP ID from which the loopback message needs to be
transmitted.
The number of LBMs to be transmitted. The default number is
1.