Dell PowerEdge M420 Reference Manual page 951

Syntax
show ipv6 pimsm bsr
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Field
BSR Address
BSR Priority
BSR Hash Mask
Length
Next Bootstrap
Message
Next Candidate RP
Advertisement
Example
console#show ipv6 pim bsr-router
BSR Address
BSR Priority
BSR Hash Mask Length
Next Bootstrap message (HH:MM:SS)
Next Candidate RP Advertisement(HH:MM:SS)00:00:02
Description
Address of the BSR
Configured BSR priority
Configured hash mask length
Remaining time until a BSR message is sent
Time remaining until the next RP advertisement is sent.
2001:0db8:0:badc::1
0
32
00:00:05
IPv6 PIM Commands
951