IP Address.....................................
FE80::2FF:EDFF:FED0:2/128
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
Neighbor Count ................................ 0
Designated Router..............................
FE80::2FF:EDFF:FED0:2
DR Priority.................................... 1
BSR Border.....................................
Disabled
show ipv6 pimsm neighbor
Use the show ipv6 pimsm neighbor command to display IPv6 PIMSM
neighbors learned on the routing interfaces.
Syntax
vlan-id
show ipv6 pimsm neighbor [ all | interface vlan
]
vlan-id —A valid VLAN ID value.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm neighbor all
Slot/Port...................................... vlan
6
1061
IPv6 Multicast Commands