Show Memory Cpu - Dell PowerEdge M420 Reference Manual

IP Address............................ 10.240.4.115
Subnet Mask........................... 255.255.255.0
Default Gateway....................... 10.240.4.1
IPv6 Prefix is .......................
FE80::20A:1EFF:FE11:1100/64
ServPort Configured Protocol Current...None
Burned In MAC Address..................0006.2932.814C

show memory cpu

Use the show memory cpu command to check the total and available RAM
space on the switch.
Syntax
show memory cpu
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show memory cpu
Total Memory........................... 262144 KBytes
Available Memory Space................. 121181 KBytes
1558
System Management Commands