User Group; User Name - Dell PowerEdge M420 Reference Manual

1 user123
2 user234
console#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Group ID
-------- --------------------------------
1 Default
2 group2

user group

Use the user group command to associate a group with a captive portal user.
Use the "no" form of this command to disassociate a group and user. A user
must be associated with at least one group so the last group cannot be
disassociated.
Syntax
user-id
user group
user-id — User ID (Range: 1–128).
•
group-id —Group ID (Range: 1–10).
•
Default Configuration
A user is associated with group 1 by default.
Command Mode
Captive Portal Configuration mode.
Group Name
group-id
14400 1
0 1
2
Captive Portal Commands
Default
Default
group2
1293