Show Ipv6 Pim Rp Hash - Dell PowerEdge M420 Reference Manual

Neighbor Addr
---------------
2001:db8:85a3:0:0:8a2e:370:7334 VLAN0010 00:02:55 00:01:15
(FASTPATH) #show ipv6 pim neighbor
Neighbor Addr
---------------
2001:db8:85a3:0:0:8a2e:370:7334 VLAN0001 00:02:55 00:01:15
2001:db8:85a3:0:0:8a2e:370:7334 VLAN0010 00:03:50 00:02:10
If no neighbors are learned on any of the interfaces, the following message is
displayed:
No neighbors are learned on any interface.

show ipv6 pim rp hash

Use the show ipv6 pim rp hash command to display the rendezvous point
(RP) selected for the specified group address.
Syntax
show ipv6 pim rp hash {
Parameter Description
Parameter
group-address
Default Configuration
There is no default configuration for this command.
Interface
--------- ----------- -----------
Interface
--------- ----------- -----------
group-address
Description
A valid group IP address supported by RP .
Uptime
(HH:MM::SS)(HH:MM::SS)
Uptime
(HH:MM::SS)(HH:MM::SS)
}
IPv6 PIM Commands
Expiry Time
Expiry Time
955