Group Radius - Dell PowerEdge M420 Reference Manual

auth-port
deadtime
key
msgauth
name (RADIUS server)
aaa accounting network default start-stop group
radius
Use the aaa accounting network default start-stop group radius command to
enable RADIUS accounting on the switch. Use the "no" form of this
command to disable RADIUS accounting.
Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-
stop group radius
654
RADIUS Commands
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
show aaa servers
show radius statistics
source-ip
timeout
usage