Permit Ip Host Mac Host - Dell PowerEdge M420 Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip arp inspection vlan 200-300
console(config)#ip arp inspection vlan 200-300 logging

permit ip host mac host

Use the permit ip host mac host command to configure a rule for a valid IP
address and MAC address combination used in ARP packet validation. Use
the "no" form of this command to delete an ARP ACL rule.
Syntax
sender-ip
permit ip host
no permit ip host
sender-ip — Valid IP address used by a host.
•
sender-mac —Valid MAC address in combination with the above sender-ip
•
used by a host.
Default Configuration
There are no ARP ACL rules created by default.
Command Mode
ARP Access-list Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-arp-access-list)#permit ip host
1.1.1.1 mac host 00:01:02:03:04:05
sender-mac
mac host
sender-ip
mac host
Dynamic ARP Inspection Commands
sender-mac
347