Commands; Mode Types - Dell PowerEdge M420 Reference Manual

Table 1-1. System Command Groups
Command Group
RMON
Serviceability Tracing
sFlow
SNMP
SSH
Syslog
System Management
Telnet Server
User Interface
Web Server

Mode Types

The tables on the following pages use these abbreviations for Command
Mode names.
• AAA — IAS User Configuration
• ARPA — ARP ACL Configuration
• CC — Crypto Configuration
• CP — Captive Portal Configuration
• CPI — Captive Portal Instance
• CMC — Class-Map Configuration
• DP — IP DHCP Pool Configuration
• GC — Global Configuration
IC — Interface Configuration (reached via interface vlan xxx command)
•
• IP — IP Access List Configuration
(continued)
Description
Can be configured through the CLI and displays RMON
information.
Controls display of debug output to serial port or telnet
console.
Configures sFlow monitoring.
Configures SNMP communities, traps and displays SNMP
information.
Configures SSH authentication.
Manages and displays syslog messages.
Configures the switch clock, name and authorized users.
Configures Telnet service on the switch and displays
Telnet information.
Describes user commands used for entering CLI

commands.

Configures web-based access to the switch.
Command Groups
77