Interface Range Port-Channel - Dell PowerEdge M420 Reference Manual

Example
The following example enters the context of port-channel 1.
console(config)# interface port-channel 1
console(config-if-po1)#

interface range port-channel

Use the interface range port-channel command in Global Configuration
mode to execute a command on multiple port channels at the same time.
Syntax
interface range port-channel {
port-channel-range — List of port-channels to configure. Separate non-
•
consecutive port-channels with a comma and no spaces. A hyphen
designates a range of port-channels. (Range: valid port-channel)
• all — All the channel-ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands in the interface range context are executed independently on
each interface in the range. If the command returns an error on one of the
interfaces, it stops the execution of the command on subsequent interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to
receive the same command.
console(config)# interface range port-channel 1-2,8
console(config-if)#
port-channel-range
Port Channel Commands
| all}
579