Commands In This Chapter; Clear Lldp Remote-Data - Dell PowerEdge M420 Reference Manual

The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.

Commands in this Chapter

This chapter explains the following commands:

clear lldp remote-data

clear lldp statistics
–
–
–
–
lldp notification
lldp notification-interval
clear lldp remote-data
Use the clear lldp remote-data command in Privileged EXEC mode to delete
all LLDP information from the remote data table.
Syntax
clear lldp remote-data
Default Configuration
By default, data is removed only on system reset.
534
LLDP Commands
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
lldp transmit-tlv
show lldp
show lldp interface
show lldp local-device
–
–
–
–
show lldp remote-device
show lldp statistics
–
–