Show Captive-Portal - Dell PowerEdge M420 Reference Manual

no https port
port-num —The port number to monitor (Range: 1–65535).
•
Default Configuration
Captive portal only monitors port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#https port 1443
console(config-CP)#no https port

show captive-portal

Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
1276
Captive Portal Commands