Table of Contents
Advertisement
Installation Conditions and Method
(2) Installing the camera body
Attach the IV-S20C1 camera body on the mounting surface with the camera angle bracket (supplied
with the IV-S20, IV-S20N and IV-S20C1).
· Installation example 1
6
· Installation example 2
· Installation example 3
Camera angle bracket
Installation procedure
1 Attach the camera angle bracket to the tapped M3 hole on the camera body (20 mm mounting
pitch: one of three holes). Two screws (M 3 x 6) are supplied with the IV-S20, IV-S20N and IV-
S20C1 for attaching the angle.
2 Attach the camera controller angle to the mounting surface with the slotted holes 3.2 mm wide (20
mm mounting pitch) or 1/4-20 UNC threaded hole.
The external dimensions of the camera angle bracket , camera body, and extension camera cable are
shown on the following page.
Camera front view
Camera angle bracket
Camera
Mounting
surface
Camera angle bracket
Camera
Mounting
surface
Camera
Mounting
surface
Camera side view
6-20
Advertisement
Table of Contents
