Table of Contents
Advertisement
Operation Examples (Position measurement)
Continued from the preceding page
(6) Image adjustment
3
1. Press the SEL key.
- The image taken by camera 1 will be displayed.
2. Adjust the focus and aperture (iris) of the camera lens (see page 5·1), so that the object to be
measured is clear and easily distinguished.
3. Press the SEL key to enter the freeze image mode.
- The indicator in the upper right corner of the screen will change from T (through) to F
(freeze).
(7) Operation for gray scale search matching setting
1. Press the ESC key, and all menus to be used for gray scale search matching setting will be
displayed.
1MES.WINDOW(MDL0) RECTANGLE XLINE YLINE
2REF IMAGE(MDL0)
2
3SEARCH AREA(MDL0) MOVE UP.L(216,200) LO.R(295,279)
4
4DTECT COORD(MDL0) CNTR FREE(256,240)
5CONTR.PIXEL(MDL0) 1 2 3
qDETECT ACCURANCY STANDARD HIGH
wUPPER MENU
6
- If the menu overlaps the image to be measured so that further image setting is hindered,
press the ESC key. Only item 1 will be displayed.
2. Move the cursor to 2 REF IMAGE (MDL0) (reference image) and press the SET key.
3. Surround the image to be measured with a window (solid line).
- Move the cursor to MOVE, UP.L, or LO.R and press the SET key. Then, position the window.
When the position is correct, press the SET key.
- After the image window position has been defined, move the cursor to REG. (register) with
left and right keys, and press the SET key.
- Move the cursor to DISP (display) with the left and right keys and press the SET key. Then,
the stored image will be displayed in the lower right corner of the screen. After checking the
image, press the ESC key.
Continued on the following page
1MEAS WINDOW(MDL0) RECTANGLE X-LINE Y-LINE
- If the image is so bright that the menu is hard to see, press the TRG/BRT key to reduce
the brightness of the image. Then, the brightness indicator in the upper right corner of
the screen will change from H to L.
- To store an image for the following gray scale search matching setting operations, the
screen must be in the freeze image mode. (See section 7-2 "Screen specifications" for
details about the through/freeze mode.)
MOVE UP.L(224,208) LO.R(287,271)
MOVE
The white rectangle is moved using the up, down, right or left keys (4 pixels at a time).
UP.L
The upper left corner is moved using the up, down, right or left keys (4 pixels at a time).
LO.R
The lower right corner is moved using the up, down, right or left keys (4 pixels at a time).
Image window
Positioning mark
3
F C1 H
Image window
Search window
REG. DISP
3-10
1
Press the TRG/BRT key on the
remote key pad, and the level
(brightness of the screen) will be
switched between H and L.
Indicates camera 1.
4
3
Advertisement
Table of Contents
