Table of Contents
Advertisement
Operation Examples (Degree of match inspection)
Continued from the preceding page
(3) Operation on the [OBJECT TYPE COND] (conditions of object type) menu
3
1
1. Move the cursor to 0 MEASUREMENT 1 and press the SET key.
- The [TYPE00-MEAS1] (type: 00, measurement: 1) menu will be displayed.
(4) Operation on the [TYPE00-MEAS1] menu
1
3
1. Move the cursor to 1 MEAS SELECTION (selection of measurement) and press the SET
key.
2. Move the cursor to CHECK-DEG-OF-MATCH (degree of match inspection) and press the
SET key.
3. Move the cursor to 6 MEAS.PROG. COND (conditions of measurement program) and press
the SET key.
- The [MEASURING COND] (measurement condition) menu will be displayed.
Continued on the following page
[OBJECT TYPE COND]
1OBJECT TYPE NO.
00(0~15)
2EDIT
COPY(
3TITLE REGISTRATION (TO NEXT SUB-MENU)
4MEAS.0, CAMERA1
NO (TO NEXT SUB-MENU)
5POS. ADJ.CAMERA1
NO ADJ. [REG. 0-1PNTSXY
6MEAS.0, CAMERA2
NO (TO NEXT SUB-MENU)
7POS. ADJ.CAMERA2
NO ADJ. [REG. 0-1PNTSXY
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
0MEASUREMENT 1
NO (TO NEXT SUB-MENU)
qMEASUREMENT 2
NO (TO NEXT SUB-MENU)
wMEASUREMENT 3
NO (TO NEXT SUB-MENU)
eFINAL CALC RESULT
(TO NEXT SUB-MENU)
rFINAL OUTPUT COND (TO NEXT SUB-MENU)
tSYSTEM-IN/OUT
(TO NEXT SUB-MENU)
yHALT MEAS ON NG
NO YES
uUPPER MENU
TYPE00-MEAS1
1MEAS SELECTION NO
DST&AGL MES. (GRAY&EDGE GRAV)
INSPECT-LEAD MEASR-BIN-AREA
CNT-BIN-OBJ LABEL-BIN-OBJ
POINT MEAS
3SELECT CAMERA CAM1 CAM2
4COPY
EXEC TYPE00 MEAS1 NO
5INITIALIZATION
EXEC
6MEAS.PROG. COND (TO NEXT SUB-MENU)
7EVALUATION COND (TO NEXT SUB-MENU)
8NUMERIC CALC COND (TO NEXT SUB-MENU)
9OUTPUT CONDITIONS (TO NEXT SUB-MENU)
0UPPER MENU
F C1 H
TYPE00) INITIALIZE
CHECK-DEG-OF-MATCH
3-16
2
Advertisement
Table of Contents
