Table of Contents
Advertisement
Continued from the previous page
Pressing the TRG/BRT key will measure the distance and angle after manually measuring the
starting point.
Below is an example of the results displayed for a distance measurement.
[Display of the inspection results]
Final evaluation result
Measuring time
Measurement number and
camera number
Registration number for the
measurement conditions
Central coordinates of the reference
image and evaluation
Degree of match with the reference
image and evaluation results
Number for the object to be
measured
Number of leads and evaluation
results
Lead pitch and evaluation results
Lead length and evaluation
(muximum/minimum in pixels)
· By moving the cursor to REG-CHNG (change registration) and pressing the up key, you can
see the inspection results corresponding to the registration number (the first number) and the
number of the object to be measured (the second number), then the results of the numerical
calculations. All of these may be scrolled through in this order: 0 (0-0 0-7) 1 (1-0 1-7) 2
(2-0 2-7) 3(3-0 3-7) N00 to N15. 0-0 is the number on display in the above illustration.
Pressing the down key in these situations will scroll backwards through the results.
· Unregistered numbers will be skipped.
· When there are no recorded numbers (other than those currently on the display ), or if no
measurement has actually been carried out, then it will not be possible to switch back and
forth between data.
· When a distance or a lead length results in an NG evaluation, the point in the image will be
marked with a circle.
Example of the display:
Distance between the center of
the leads NG (marked with a circle)
(TYPE00)
OK
MEAS. XXXXXXms
MEAS1 CAM1 INSPECT LEAD
REGST NO. 0(0~3)
X COORD 202.0
Y COORD 281.0
MATCH
MEAS OBJ : 0-0(0~7)
NUMBER 005
DISTANCE 040.0
L-LEN
X0~6
:
MSR-CHNG REG-CHNG PC-MONTR SET-SCRN MANL-TYP-CHG
Longest distance
Shortest distance
between center points
between center points
9-81
OK
OK
09957 OK
OK
OK
039.0
034.0
OK
032.0
Y0~7
:
Lead length NG
(marked with a circle)
Lead inspection
F H C1ALLC2NO
VX.X
BUSY
:
Longest lead length
Shortest lead length
9
Advertisement
Table of Contents
