Table of Contents
Advertisement
Positional deviation measurement
Continued from the previous page
[NUMERIC CALC]
1CALC.RESULT
2OBJECT TYPE
3FORMULA
4UPPER&LOWER LIMIT +00000650.0~+00000700.0
5OUTPUT
6TEST A RUN
7UPPER MENU
N00
N01
N02
N03
Numerical calculation
1CALC.RESULT
(calculation result)
2OBJECT TYPE (type)
9
3FORMULA
4UPPER&LOWER LIMIT
5OUTPUT
6TEST A RUN
(make a test run)
7UPPER MENU
· The number of formulas which can be set are dictated by the selections made in items 2 and 3
as follows.
Coordinates X/Y
Coordinate deviation x/y
Degree of match M
Angular deviation B
Numerical calculation NC
Constant C
The numbers ranging from 0 to 7 in front of the characters are registration numbers.
· For more information on numerical calculations see section 9-2 [4] Numerical calculations.
Note: You must run a test using item 6 TEST A RUN, before making any calculations.
Return to the [TYPE00-MEAS0] menu and select item 7 OUTPUT CONDITIONS (output condition).
Continued on the following page
(TYPE00-MEAS.0-POS-DEVIATION)
N00(0~15)
NO COORD[X Y] DEVIAT[x y] MATCH [M]
ANGL-DEV[B] NUM-CALC[NC] CNST[C]
REG.0(0~7) MDL0(0~1) N00(0~15)
+ - ∗
/
NO Y0(0~7) C000(0~107)
(SET KEY)
0X0 0X1
[X]
+00000650.0~+00000700.0
N00 0M1
[M]
+00065000.0~+00070000.0
Set the recording and display of the results from arithmetical operation for
specified output data at any value from 00 to 15.
Select the type of data being calculated.
A number of formula settings are used.
The first line will change according to the selection made in item 2.
The coordinates [XY], the deviation
coordinates [xy], and the degree of
match with the reference image. [M]
Angular deviation [B]
Numerical calculations [NC]
Constant [C]
Note: Please use a smaller number for the number of formulas at N (00 to 15)
than that used for 1 CALC. RESULT N (00 to 15).
Set the upper and lower limits for decisions.
Set the output conditions for the results of calculations.
Pressing the SET key will record the setting details as well as run a test.
Returns you to the [TYPE00-MEAS0] menu.
2OBJECT TYPE
0X0 to 7X0/0Y0 to 7Y0
0x0 to 7x0/0y0 to 7y0
0M0 to 7M0
0B to 7B
ABS/ /TAN/ATAN (00 to 15)
-99999999.9 to +99999999.9
DEL END
Y0
00000660.0
OK
Y1
00064000.0
NG
Setting details
Selection of 2
Model 0
0X1 to 7X1/0Y1 to 7Y1
0x1 to 7x1/0y1 to 7y1
0M0 to 7M0
9-42
The first line of the display
Record 0 (0 to 7) Model (0 to 1)
N00 (0 to 15)
Record 0 (0 to 7) N00 (0 to 15)
ABS
TAN ATAN N00 (0 to 15) (the
second line will not be displayed)
+00000000.0 (the second line will not
be displayed)
Model 1
Advertisement
Table of Contents
