Table of Contents
Advertisement
From the preceding page
(3) Ladder circuit creation 2 (setting output signals)
[OUTPUT CONDITIONS]
1PAGE NO.
2SET POSITION
1
3INPUT SIGNAL
4LOGICAL SYMBOL
5OUTPUT SIGNAL
2
6UPPER MENU
1. Move the cursor to item 2 SET POSITION and press the SET key.
- Move the cursor to a row where a ladder circuit output signal will be placed with the up and
down keys, and press the SET key.
An output signal can only be placed on rows where input signals have already been placed.
2. Set the cursor to item 5 OUTPUT SIGNAL with the up and down keys, and press the SET
key.
- Select an output auxiliary relay number (see page 10-7) with the up and down keys, and press
the SET key.
-
The output symbol and auxiliary relay number will be displayed on the row specified in step 1.
Display example:
[PAGE0]
INPUT0
LOGIC
(4) Create a ladder circuit for the page numbers registered in step (1), repeating the operations in
steps (2) and (3)
Creation example:
[PAGE0]
INPUT0
LOGIC
INPUT1
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
Note: Output relays cannot be used in series on a ladder circuit. Change circuit a to circuit b.
(5) Storing the circuit in the IV-S20 memory (RAM)
4LOGICAL SYMBOL
5OUTPUT SIGNAL
6UPPER MENU
1
1. Move the cursor to item 6 UPPER MENU with the up and down keys, and press the SET key.
- The screen will return to the [TYPE-MEAS] menu, and the ladder circuit creation process
will be finished.
(TYPE00-MEAS.0-POS-DEVIATION)
0(0~4) REG.NO YES
MOVE
REGT.NO.00(0~ )
MATCH M0(0~1) CRD.X0(0~1) CRD.Y0(0~1)
DEVIAT-x0(0~1) DEVIAT-y0(0~1) AGL-DV B
CAL N00(0~15) AUXRLY C000(0~127)
AUX.RLYC000(0~127) DEL.
0
1
2
3
0M0
0
1
2
3
0M0
C001
N01
N02
N03
N04
Circuit a
C010
C001
C011
AUX.RLYC000(0~127) DEL.
10-5
DEL.
4
5
6
7
OUT
C000
4
5
6
7
OUT
C000
C001
Circuit b
C001
C001
DEL.
PC Function
C010
C011
10
Advertisement
Table of Contents
