Management Crypto-Policy; Match - Dell S4810 Reference Manual

management crypto-policy

Apply the crypto policy to management traffic.
S4810
Syntax
management crypto-policy name
To remove the management traffic crypto policy, use the no management
crypto-policy name command.
Parameters
name
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)

match

Apply an match filter to the crypto policy.
S4810
Syntax
match seq-num tcp [sourceip address | ipv6 address {mask}
{source-port number}] [destination ip address | ipv6 address
{mask} {destination-port number}]
To remove the match filter for the crypto map, use the no match seq-num tcp
[source ip address | ipv6 address {mask} {source-port number}]
[destination ip address | ipv6 address {mask} {destination-port
number}] command.
Parameters
seq-num
sourceip-
address | ipv6
address
mask
826
Enter the name for the crypto policy..
Introduced on the Z9000, S4810, and S4820T.
Enter the match command sequence number.
Enter the keyword source then the IPv4 or IPv6 address for
the source.
Enter the mask prefix length in /nn format.
Internet Protocol Security (IPSec)